Kitchen Cabinets Installation: Kitchen Pro's Base Cabinet Drawer Installation

Click here for a FREE no obligation sample

ASSEMBLY INSTRUCTIONS - DRAWER INSTALLATION

NEED HELP?

INSTALLATION RESOURCES

Research Center
Kitchen Cabinets Glossary
Installation Frequently Asked Questions

SITE POLLS

Please rank the ease of assembly:

RECOMMENDED INSTALLATION TOOLS

	Flathead / Philips Screwdriver Required Tool

	Electric Screwdriver Recommended Tool

	Rubber Head Hummer Recommended Tool

	3/4" Staples Gun Recommended Tool

	Hot Glue Gun Recommended Tool

CABINETS SELECTION

Click here to browse our cabinets' catalog

THESE ASSEMBLY INSTRUCTIONS APPLIES TO THE FOLLOWING STYLES:

Cherry Maple	Espresso Maple	French Antique Glazed	Honey Maple	Macchiato Maple
Click any image to enlarge

STEP 1:

Locate all of the following parts:
1. Bottom panel
2. Two side panels (long ones)
3. Back panel
4. Front panel (drawer face)

STEP 2:

Connect the side panel to front panel.
Optional: Use carpenters glue to glue connections.

STEP 3:

Connect the other side panel.

STEP 4:

Slide in the bottom panel to the groove on the bottom.

STEP 5:

Make sure bottom panel is aligned with the back of the side panels.

STEP 6:

Connect the back panel. Make sure that the notch and the pre-drilled holes are facing down.

STEP 7:

Locate the pre-drilled holes on the side of the cabinet.
Connect the drawer guides using a drill or a screwdriver.

STEP 8:

Make sure the front of the drawer guides align with the back side of the face frame.

In the photo the left guide is installed correctly. The right one is NOT CORRECT because the front of the guide passes the back side of the face frame.

STEP 9:

Slide drawer until the pins are in the holes.

STEP 10:

Insert the pins in the holes.
Note: The round plate under the pin can be used for easy adjustments.
Congratulations! Your drawer is now ready.

Wholesale Discounted Cherry Kitchen Cabinets