Kitchen Cabinets Installation: Kitchen Pro's Base Cabinet

Click here for a FREE no obligation sample

ASSEMBLY INSTRUCTIONS - BASE CABINET

NEED HELP?

INSTALLATION RESOURCES

Research Center
Kitchen Cabinets Glossary
Installation Frequently Asked Questions

SITE POLLS

Please rank the ease of assembly:

RECOMMENDED INSTALLATION TOOLS

	Flathead / Philips Screwdriver Required Tool

	Electric Screwdriver Recommended Tool

	Rubber Head Hummer Recommended Tool

	3/4" Staples Gun Recommended Tool

	Hot Glue Gun Recommended Tool

CABINETS SELECTION

Click here to browse our cabinets' catalog

THESE ASSEMBLY INSTRUCTIONS APPLIES TO THE FOLLOWING STYLES:

Coffee Glazed Maple	Vanilla Glazed Maple
Click any image to enlarge

STEP 1:

Locate the face frame

It is best to re-install the door after the installation of all cabinets. Otherwise, doors might be damaged during the assembly and installation.

STEP 2:

Remove the doors and the drawer face in order to prevent damaged during the assembly or the installation process.

STEP 3:

Place both side panels into the grooves of the face frame. Make sure to align the metal clips properly (two on each side).

STEP 4:

Slide in the bottom panel into the grooves of the side panels and the face frame.

STEP 5:

Secure all clips using the supplied screws.

STEP 6:

Place the back panel in its' place (make sure all the clips are aligned properly) and secure it.

STEP 7:

Place the toe kick panel and secure it with the metal clips.

STEP 8:

Attach the supplied plastic corner brackets using screws.

STEP 9:

Secure the drawer glides holds to the back panel using the pre-drilled holes for alignment.

STEP 10:

Connect the drawer glides to the drawer glides holders.

STEP 11:

Connect the front of the drawer glide to the face frame. Use any of the pre-drilled holes for alignment.

STEP 12:

Connect the drawer's side panel to the back panel. No screws are needed.

STEP 13:

Connect the other side panel and slide in the bottom panel into the grooves.

STEP 14:

STEP 13:

Connect the face frame to the drawer.

STEP 15:

Place the drawer on the drawer glides. Insert the back drawer holder into the pre-drilled hole in the drawer as shown on the left side of the photo.

STEP 16:

Insert the drawer glide pin into the pre-drilled hole on the bottom of the side panel. Use the sheave on the bottom of the pin for adjustments and alignments

STEP 17:

Place the bottom shelves using the supplied shelves holders.
Congratulations, your cabinet is now ready.

Wholesale Discounted Cherry Kitchen Cabinets